References
Gallaher, M.P., & Depro, B.M. (2002). Economic impact analysis of the final integrated iron and steel NESHAP (Final report, EPA 452/ R-02-009). U.S. Environmental Protection Agency. https://www3. epa.gov/ttn/ecas/regdata/IPs/Iintegrated%20Iron%20and%20 Steel_IP.pdf Green, H.Y.F., & Vallyathan, V. (1995). Pathological responses to inhaled silica. In V. Castranova, V. Vallyathan, & W.E. Wallace (Eds.), Silica and silica-induced lung disease: Current concepts (pp. 163–185). CRC Press. Gupta, A., & Yan, D. (Eds.). (2016). Mineral processing design and operations: An introduction (2nd ed.). Elsevier B.V. https://doi. org/10.1016/C2014-0-01236-1 Hager, L., & Johnson, C. (2015). Noise stressors. In S.D. Jahn, W.H. Bullock, & J.S. Ignacio (Eds.), A strategy for assessing and man- aging occupational exposures (4th ed., pp. 197–204). American Industrial Hygiene Association. Hamilton, R.F., Jr., Thakur, S.A., & Holian, A. (2008). Silica bind- ing and toxicity in alveolar macrophages. Free Radical Biol- ogy and Medicine , 44 (7), 1246–1258. https://doi.org/10.1016/j. freeradbiomed.2007.12.027 International Labour Organization. (2021). Exposure to hazardous chemicals at work and resulting health impacts: A global review . https://www.ilo.org/wcmsp5/groups/public/---ed_dialogue/---lab_ admin/documents/publication/wcms_811455.pdf Kaviarasu, C., & Ravichandran, M. (2021). Nanomateri- als through powder metallurgy: Production, processing, and potential applications toward energy and environment. In O.V. Kharissova, L.M. Torres-Martínez, & B.I. Kharisov (Eds.), Handbook of nanomaterials and nanocomposites for energy and environmental applications (pp. 859–897). Springer. https://doi. org/10.1007/978-3-030-36268-3_127 Kossoris, M.D., & Kjaer, S. (1936). Injury experience in the iron and steel industry, 1934 and 1935. Monthly Labor Review , 43 (5), 1370–1384. https://www.jstor.org/stable/41814996 Logan, P.W., Ramachandran, G., Mulhausen, J., & Hewett, P. (2009). Occupational exposure decisions: Can limited data interpreta- tion training help improve accuracy? The Annals of Occupational Hygiene , 53 (4), 311–324. https://doi.org/10.1093/annhyg/mep011 Lyon, B.K., & Hollcroft, B.D. (2016). Risk assessment fundamentals. In G. Popov, B.K. Lyon, & B.D. Hollcroft, Risk assessment: A practi- cal guide to assessing operational risks (1st ed., pp. 49–66). John Wiley & Sons, Inc. McManus, N. (1999). Safety and health in confined spaces (1st ed.). CRC Press. Ministry of Steel, Government of India. (n.d.). Safety guidelines for iron & steel sector: Hot rolling mills (automatic) (Document no. SG/37). https://steel.gov.in/sites/default/files/SG-37%20Safety%20 guidelines%20for%20Hot%20Rolling%20mills%20%28Auto matic%29.pdf Mohammed, A.R., Mohamed, M.O., Alhubaishy Y.A., Nasser, K.A., & Fahim, I.S. (2020). Ergonomic analysis of a working pos- ture in steel industry in Egypt using a digital human modeling.
SN Applied Sciences , 2 , Article 2085. https://doi.org/10.1007/ s42452-020-03872-y Monazzam, M.R., Zakerian, S.A., Kazemi, Z., Ebrahimi, M.H., Ghal- jahi, M., Mehri, A., Afkhaminia, F., & Abbasi, M. (2019). Investi- gation of occupational noise annoyance in a wind turbine power plant. Journal of Low Frequency Noise, Vibration and Active Control , 38 (2), 798–807. https://doi.org/10.1177/1461348418769162 Mulhausen, J., & Damiano, J. (2015). Establishing similar exposure groups. In S.D. Jahn, W.H. Bullock, & J.S. Ignacio (Eds.), A strat- egy for assessing and managing occupational exposures (4th ed., pp. 37–52). American Industrial Hygiene Association. Mulhausen, J.R., & Damiano, J. (2011). Comprehensive exposure assessment. In D.H. Anna (Ed.), The occupational environment: Its evaluation, control, and management (3rd ed., Vol. 1, pp. 228–243). American Industrial Hygiene Association. National Institute for Occupational Safety and Health. (2019). The NIOSH occupational exposure banding process for chemical risk management . Centers for Disease Control and Prevention. https:// doi.org/10.26616/NIOSHPUB2019132 Ning, X., Hu, B., Alessa, F., & Almuhaidib, I. (2015). Safety first: Ergonomic interventions for steel manufacturing workers . Associa- tion for Iron & Steel Technology. https://www.aist.org/AIST/aist/ AIST/Publications/safety%20first/Safety_First_-Dec_15.pdf North Carolina Department of Labor, Occupational Safety and Health Division. (2014). A guide to safety in confined spaces . https://www.uncp.edu/sites/default/files/2019-06/DOL%20-%20 A%20Guide%20to%20Confined%20Spaces.pdf Nyarubeli, I.P., Tungu, A.M., Bråtveit, M., Sunde, E., Kayumba, A.V., & Moen, B.E. (2018). Variability and determinants of occupa- tional noise exposure among iron and steel factory workers in Tanzania. Annals of Work Exposures and Health , 62 (9), 1109–1122. https://doi.org/10.1093/annweh/wxy071 Occupational Safety and Health Administration. (n.d.). OSHA’s Safety Pays Program: Estimated costs of occupational injuries and illnesses and estimated impact on a company’s profitability worksheet . https:// www.osha.gov/safetypays/estimator Ong, C.N., Phoon, W.O., Iskandar, N., & Chia, K.S. (1987). Shift- work and work injuries in an iron and steel mill. Applied Ergonom- ics , 18 (1), 51–56. https://doi.org/10.1016/0003-6870(87)90070-6 Perelman, D.R. (2016). Steel: The story of Pittsburgh’s iron & steel industry, 1852–1902 . The History Press. Permit-Required Confined Spaces, 29 C.F.R. § 1910.146 (2023). https://www.ecfr.gov/current/title-29/subtitle-B/chapter-XVII/ part-1910/subpart-J/section-1910.146 Plog, B.A., & Quinlan, P.J. (2012). Fundamentals of industrial hygiene (6th ed.). National Safety Council. Prabhu, H.W., & Cilione, P.F. (1992). 1990 Clean Air Act Amend- ments: Technical/economic impacts. Iron and Steel Engineer , 69 (1), 33–44. Radian Robotics. (n.d.). Case study: Steelscape steel coil de-banding . https://radianrobotics.com/case-studies/steelscape-steel-coil- de-banding
continued on page 18
17
December 2023 • Journal of Environmental Health
Powered by FlippingBook